Make sure the surface is clean, dry, free of any residue. Remove old or loose wallcoverings, damaged wallboard or plaster, and repair any damaged surfaces if needed.
Priming is always recommended to ensure a better performance.
Glues for installation
Before installation, laying the panels on the floor for 24 hours to let it physically flat for easy installation
The easiest way is to install with 3M Command Strips, but only those sleek surfaces like metal, glass, ceramic or well primed are right for it
We recommend to install with heavy duty construction adhesive(gorilla brand recommended) for all kinds of surfaces
Cutting for 3d Wall Panels
Using tile saw( diamond bladed is ideal), table saw or other electric saw to cut the tile
For outlet cutting, using a Dremmel or tin snips would be easier
To trim, use a pair of tin snips / aviation snips.
Panels Painting
It can be left as what it is, no additional finish required
For painting, leaving around 1mm gap bewteen tiles to fill the caulking for creating a seamless look if needed
Choosing the oil-based paint to finish the PVC wall panel (please take note for Plantfiber wall panel should using water-based paint)
To achieve a good performance of finish, spray is recommended
If spray is not available, brushing or rolling works as well